burkert 6126 A-T電磁閥寶帝6126 The direct-acting rocker solenoid valve, Type 6126, is suitable for general applications in which compressed air, gases or slightly contaminated liquids are to be switched.burkert 6126 A-T電磁閥寶帝6126 The medium is in contact exclusively with the housing material and the FKM seals. The heat input in the medium is minimal, because the housing is separated from the coil by a stainless steel plate. The valves can be mounted directly or also single or manifold mounted. They are used for dosing, fi lling, mixing and distributing small quantities of medium.
特點：
參數：
Orifi ce [mm] DN 0.8 - 1.6 (for details see ordering chart)
Body material PPS
Seal material FKM, EPDM
Medium Resistant to neutral liquids and gases (see Bürkert chemical
resistance chart)
Media temperature -10 to 55 °C 1)
Ambient temperature max. 55 °C
Viscosity max. 21mm2/S
Internal volume
with sub-base
on request
starting at 44 μl
< 10 μl 2)
Port connection Bürkert sub-base (16 x 27 mm)
Electrical connection Cable plug Type 2505
Tag connector acc. DIN 43650 C for Cable plug
Type 2506 above
2 FEP-Flying leads, AWG24, lenght 500 mm 3)
Operating voltage 12 and 24 V/DC; other Voltages on request
Voltage tolerance ± 10 %
Power consumption 3.4 W
Duty cycle continuous rating 100 % ED
Installation as required, preferably with actuator upright
Protection class IP 65 with fl ying leads or cable plug
IP 40 with Rectangular plug
Response times
Opening
Closing
acc. ISO 12238:2001; Measured at valve outlet at 2 bar and
+20 ºC
approx 25 ms (Pressure range 0 to 10 %)
approx 25 ms (Pressure range 100 to 90 %)
